Home / Can not connect to the live stream

There are a few troubleshooting steps that can be taken if your Live Steam cannot connect. If the Live Stream of a camera times out, the live streaming will display failed. Below are some troubleshooting steps for your reference :

Note: Sometimes the microSD card in the camera or third-party USB cables can cause issues. If you have access to the camera, try removing the microSD card and use the power adapter and USB cable that came with the eco4life Cam to
see if this resolves the issue. 

If your eco4life Cam can't successfully stream though the servers can see that it's there. This can be caused by having too many devices connecting to the network. Try the following:

  • Disconnect your smartphone or tablet from your WiFi network and reconnect it
  • If that doesn't work, you can try connecting to a different network or switching to Mobile Data (4G/LTE)
  • If the issue persists, try disconnecting devices from your network such as other smart devices, tablets, or computers

IF still live streaming failed,  please try bellow also:

  • Unplug the camera's USB cord, wait 5 seconds, and plug it back in. 
  • If you still get the error, you can try to deactivate any firewall settings on your device or network. 
  • Slow internet speeds can also cause these errors.
    • Test your internet speed by going to https://www.speedtest.net/ on the smartphone or tablet you are using and run the test. 
    • eco4life Cam needs a minimum upload speed of 1-2 Mbps for SD and 4-7 Mbps for HD. Try connecting to a different network or lower the traffic from other devices on your network if you are below the minimum.

 Upload.jpg

Check for the upload speed, not the download speed, of your network.